Need VIN for swap 6.0L & 4l80E with ETC
Nov 4, 2005 | 12:15 AM
#1
Thread Starter
Launching!
Joined: Oct 2004
Posts: 215
Likes: 0
Need VIN for swap 6.0L & 4l80E with ETC
I need to know for programming purposes. If anyone can tell me what years/models had this set up that would also be helpful. Again I have a 6.0l (with ETC), a 4L80E (4x4) and transfer case shouldn't matter.
Nov 4, 2005 | 05:46 PM
#2
It will have to be '03 or newer. There were no such animals in '02- back models. I ran into this same prob when I put the '80e in and I ended up going with a cable throttle. It can be done with 2003 and newer componenets but they all have to match-PCM, TB, TAC etc.
Nov 4, 2005 | 10:32 PM
#3
Thread Starter
Launching!
Joined: Oct 2004
Posts: 215
Likes: 0
Originally Posted by L-EATER
It will have to be '03 or newer. There were no such animals in '02- back models. I ran into this same prob when I put the '80e in and I ended up going with a cable throttle. It can be done with 2003 and newer componenets but they all have to match-PCM, TB, TAC etc.
Thread
Thread Starter
Forum
Replies
Last Post
lycominghunter
GM Drivetrain & Suspension
5
Jul 29, 2015 04:24 PM
oharajo
Tuning, Diagnostics, Electronics, and Wiring
2
Jul 18, 2015 09:24 PM
