I am planning on using the djm 4/6 kit to give my truck the stance that i am going for, has anyone out their used this kit and if so what do they think about it did you like it , does it ride good how do tires last on it, does the feel of the truck feel any different or if you have any advise on what kit or how to lower it other than this let me know thanks

 

I do in fact have the DJM 4/6 drop...front tire wear was a little premature, but I didn't get the upper control arms. I would strongly suggest getting them to help get your camber where it should be.

The ride is actually GREAT! I love the way my truck rides now...doesn't feel like a buggy anymore! But, I've been driving hammered vehicles for the last 10 years or so!

Here's a pic on 255/35/20's:

<img src="http://acrophobia.net/Members/scream/denial_1.jpg" alt=" - " />

<img src="http://acrophobia.net/Members/scream/denial_sv.jpg" alt=" - " />

<small>[ December 10, 2002, 01:27 PM: Message edited by: Scream ]</small>

 

message scream he has a 4/6 on his

 

thanks looks good ,I have seen it somewhere else on the internet beefore Where did you get the kit from and have you ever hauled any loads in it with the kit like dirt bikes, fourwheelers or trailers etc. if so how did it do

 

Nope, I haven't towed with it at all. With the tonneau cover on, the truck hits the notch/bumpstops when you really get into the throttle, so I'm guessing that your towing capacity would really be limited!

Some "helper" style airbags would work wonders for the rear setup though. My friend in town did them, and while he hasn't towed anything, the truck seems to ride a bit smoother than mine.