Hey guys, looking for some advice on lowering my Z71. It's a 2006 CCSB 4x4. I'd like to do a 2/4 kit. I was planning on pulling the rear blocks, adding 2" lowering shackles and drop shocks out back. Up front I was looking at some 2" spindles and adjusting the torsion bars until it looked right. I want it to ride as well as it does now with the truck leveled on the T-bars. It will be getting some 20" or 22" Texas Edition wheels shortly after. If possible I do not want a flip kit and a C-notch is not an option.

Thanks!

 

Do the rear as you have planned.
Up front do the coil over swap

 

Could do some coilovers for the front

See my sig for more details