Driver's seat armrest removal...
#1
Thread Starter
Joined: Mar 2006
Posts: 2,867
Likes: 2
From: Dallas, Georgia
The armrest upholstery is trashed from years of use. Has anyone removed theirs and had it recovered or replaced with a used or new one? Also, if you have, how do you remove it?
#4
TECH Resident
Joined: Mar 2005
Posts: 943
Likes: 0
From: Texas
I have removed my armrest once but has been a while, so I had to wait until I got back home to look my manual.
Removal Procedure
1. Release the bottom edge of the set back cover.
2. Use a small bladed to in order to release the clip retaining the armrest to the seat back. (You should be able to see the clip once the seat back (fabric) is pulled up a little)
3. Pull the armrest from the seat back.
There is picture but I don't have a scanner.
Removal Procedure
1. Release the bottom edge of the set back cover.
2. Use a small bladed to in order to release the clip retaining the armrest to the seat back. (You should be able to see the clip once the seat back (fabric) is pulled up a little)
3. Pull the armrest from the seat back.
There is picture but I don't have a scanner.
Thread
Thread Starter
Forum
Replies
Last Post





