iregret

iTrader: (4)

I picked up some powered leather heated seats from a 2003 Silverado. They'll obviously bolt it, but I'm not sure the proper way to power them. Does anyone happen to have a wiring diagram?

I'll post some pictures tomorrow. I figured it would just be a 12v+ and ground to power them. I'm not sure how the heated seats work or if I can even get them to work.

Any help would be greatly appreciated.

iregret

iTrader: (4)

I found this:

https://www.performancetrucks.net/fo...needed-495521/

Kinda answered some of the questions.

Any advice from folks that have done this swap?

iregret

iTrader: (4)

Anybody?

My seat's wiring is just cut and I don't have the memory control module so it looks like I won't be able to make the heated seats work.

Has anyone made the heated seats work without the module? Just curious.

AKlowriderZ71

iTrader: (22)

I'm just setting up a new laptop(old one died). I'll post a wiring diagram for you later tonight, or tomorrow.

iregret

iTrader: (4)

Thanks buddy.

JoeyGC5

iTrader: (24)

I swapped 09 Power Tahoe seats into my 01 GMC. Due to the new seats not having seat belts I had to make a harness bar, which allowed me to not have to worry about the seatbelt latch switch. For the seats I only needed a power and ground to each seat and that was it for my swap.

AKlowriderZ71

iTrader: (22)

iregret

iTrader: (4)

Sweet! Thank you.

AKlowriderZ71

iTrader: (22)

Mitchell posts the diagrams to print on 8.5 x11" paper. The drawback is that only half of the diagram fits on the screen. But if you print the pics, you can tape the 2 halves together.

The heated seats maybe the only tricky part for you.