Hey Guys,

I'm swapping over to a TBSS intake/throttle body when I do my cam swap later this month. I need a few parts to make this happen.

Does anyone have an X-link they no longer need? I'm looking to spend UNDER $200 for one thats lightly used.

I also need the correct injector adaptors to go from my 05 Denali to the NNBS flex fuel injectors. To be honest I'm not sure exactly which harness' i need. The new injectors are EV6 correct? And my old ones are EV1?

Let me know what you got!

Thanks,
Rob

 

No one has either of these items???

BUMP...

 

you have mini delphis now, and yes you need eve's. when i did mine i just got pigtails and soldered the new ones on. looks factory and saved me 100 bucks on adapters

 

ev6's*

 

I'm really pretty new to all this stuff with injectors... think you could give me a little more direction here? Do you have any pictures? What parts will I need to buy exactly?

Thanks,
Rob

 

i got pigtails from a tbss i believe. just the connectors to the injectors and cut the wire with plenty of wire left. i then matched with the colors on my injector harness and went to town sodering everything. i used stock ls2 injectors so all i did was switch the o rings around and they went right on. no problems.

 

EV6 Fuel Injector Plug Pigtails for Conversion Set of 8 | eBay

Is that what I need?

 

that appears. mine were green. color don't matter though. the colors on the wires got aggravating sometimes as a red and pink appear the same color and both had that wire lol.

but in the end it took a hour of my girlfriend holding the wires under the hood why i soldered at 1230 in the morning lol

 

Bump...

No one has an x-link they're lookin to part with???