WTB RODS PISTONS CRANK and MISC
Feb 16, 2011 | 12:16 PM
#1
Thread Starter
Teching In
Joined: Oct 2009
Posts: 30
Likes: 0
From: Alcohaulin, KY
WTB RODS PISTONS CRANK and Block
A few things im looking to buy!!!!!
6.0 iron block
4" stroker crank
6.125" rods
4.030" pistons
60# injectors
l92 Roller rockers
PM or txt call 606-584-2413
6.0 iron block
4" stroker crank
6.125" rods
4.030" pistons
60# injectors
l92 Roller rockers
PM or txt call 606-584-2413
Last edited by bluelq4; Feb 19, 2011 at 11:42 PM.
Feb 19, 2011 | 11:49 PM
#3
I have a brand new set of pistons and rods. Rods are 6.125 forged H beam Engine pro branded, same as eagle and scat, made by the same company. they have arp 2000 rod bolts, rods are good for 900HP. looking for $350+ shipping.
Pistons are brand new Mahle, but for stock stroke, and a little bigger than what you want. They are 4.06 bore forged, come with rings and pins and locks. flat top, 1cc valve reliefs. looking for $400 + shipping.
I bought them to do a nitrous motor that I have decided to go another way. pm me if your interested.
Pistons are brand new Mahle, but for stock stroke, and a little bigger than what you want. They are 4.06 bore forged, come with rings and pins and locks. flat top, 1cc valve reliefs. looking for $400 + shipping.
I bought them to do a nitrous motor that I have decided to go another way. pm me if your interested.
Feb 20, 2011 | 08:47 AM
#4
i have a lunati 4" forged ,nife edged std/std ! used only in mock up! never ran. cost $2042, dont need anymore (hopefully) ! no reluctor wheel, you can have your local machine shop install 1 for a round a $100. or i can have 1 installed for ya for the extra $100! your call. $1000 shipped! let me know if interested.
Thread
Thread Starter
Forum
Replies
Last Post
