WCCH heads, NitroDave nitrous kit, Solid roller Cam and Lifters.....BRAND NEW
Apr 24, 2010 | 02:10 PM
#1
Thread Starter
formerly silverbrick (changed 02/17/2013)
iTrader: (5)
Joined: Mar 2006
Posts: 4,525
Likes: 0
From: Pasadena, Tx
WCCH heads, NitroDave nitrous kit, Solid roller Cam and Lifters.....BRAND NEW
Nitro daves custom sheet metal Intake Elbow....SOLD
Nitro Daves custom plate kit without plate (used to connect to spray bars in Vic Jr intake.). Up to 300hp supported. Comes with solenoids, AN fittings, tubing, 10# tank, jet packs, AND MORE
(retailed $550) new in box. $375.00
Morel Solid Roller Lifter Set-- part# 184-4737-SR.....SOLD
(Pictures upon request)
Custom cam from West Coast Cylinder Heads- solid roller- 252/258 .641 .652 110LSA.....SOLD
(Pictures upon request)
Hardened chromoly push rods length matched to cam and solid roller lifter combination....SOLD
(Pictures upon request)
WCCH custom machined Edelbrock 245 aluminum heads. Complete with patriot dual extreme (upgraded) springs (ARP headbolts included)....SOLD
Peak intake flow: 330cfm @ .600"
Exhaust: 260cfm @ .600"
Milled to 57cc chamber size for some high compression power (non-FI req'd)
Harland Sharp 1.7 ratio shaft mount Adjustable rockers- Retail at $495.......SOLD
^^I Will combine the rockers and heads above for a total of SOLD^^
All these parts that are not NIB have never been run. All have been lubed and assembled into a 370 long block, wrapped in plastic and stored in a garage. Feel free to make any offers you are comfortable with.
Nitro Daves custom plate kit without plate (used to connect to spray bars in Vic Jr intake.). Up to 300hp supported. Comes with solenoids, AN fittings, tubing, 10# tank, jet packs, AND MORE
(retailed $550) new in box. $375.00
Morel Solid Roller Lifter Set-- part# 184-4737-SR.....SOLD
(Pictures upon request)
Custom cam from West Coast Cylinder Heads- solid roller- 252/258 .641 .652 110LSA.....SOLD
(Pictures upon request)
Hardened chromoly push rods length matched to cam and solid roller lifter combination....SOLD
(Pictures upon request)
WCCH custom machined Edelbrock 245 aluminum heads. Complete with patriot dual extreme (upgraded) springs (ARP headbolts included)....SOLD
Peak intake flow: 330cfm @ .600"
Exhaust: 260cfm @ .600"
Milled to 57cc chamber size for some high compression power (non-FI req'd)
Harland Sharp 1.7 ratio shaft mount Adjustable rockers- Retail at $495.......SOLD
^^I Will combine the rockers and heads above for a total of SOLD^^
All these parts that are not NIB have never been run. All have been lubed and assembled into a 370 long block, wrapped in plastic and stored in a garage. Feel free to make any offers you are comfortable with.
Last edited by 1ImperialSS; Apr 28, 2010 at 11:47 AM.
Apr 27, 2010 | 11:57 AM
#4
Thread Starter
formerly silverbrick (changed 02/17/2013)
iTrader: (5)
Joined: Mar 2006
Posts: 4,525
Likes: 0
From: Pasadena, Tx
Bump. If you would be interested in combining certain parts (cam, lifters and push rods for example) shoot me a PM for a better deal. I am motivated to sell on the heads so don't hesitate to make an offer
prices also lowered
prices also lowered
Apr 28, 2010 | 11:49 AM
#7
Thread Starter
formerly silverbrick (changed 02/17/2013)
iTrader: (5)
Joined: Mar 2006
Posts: 4,525
Likes: 0
From: Pasadena, Tx
Hope none of you were sitting on your hands about this setup because someone has gone and bought it all as a combo. Only thing left available is the nitrous kit.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
BennyB
GM Parts Classifieds
15
Aug 1, 2015 08:48 AM
