Trunion upgraded rockers
Nov 2, 2018 | 08:46 AM
#3
Launching!
Joined: May 2014
Posts: 216
Likes: 8
From: san mateo cali
Hey I notice you have a Ls9 Cam in a 5.3. You boosted? I have the cam by was talked out of putting it in my truck. It’s a 08 5.3 243 heads stock but turboing it and was wondering if I should run that cam or not?
Nov 2, 2018 | 09:43 AM
#4
Nov 2, 2018 | 10:54 AM
#6
He's NA. Not boosted. I made 477 with an LS9 cam and 12psi, I ran like a 17.00 1/4 because the damn thing couldnt get out of its own way until ~25mph. Talking like 2.5 60' I bet.
Its not a good truck cam, at all. Its great for an LS swapped fox body on a 76mm or with a TVS, but beyond that its a pretty sorry truck cam.
Its not a good truck cam, at all. Its great for an LS swapped fox body on a 76mm or with a TVS, but beyond that its a pretty sorry truck cam.
Trending Topics
Nov 2, 2018 | 11:59 AM
#8
Because you lose 60+ lb/ft of torque off idle with it. Because its a heavy *** truck with a small displacement motor. Because the cam is cut to make power from 3700-6800rpm. Because the cam is intended for square port heads that need a lot of exhaust duration, but not much intake duration. Because better options exist. Because he is currently NA and will regret the LS9 choice.
Thread
Thread Starter
Forum
Replies
Last Post
JordanH
GM Parts Classifieds
5
Nov 22, 2015 02:53 PM
