Anyone with a tvs1900, or any other non-centrifugal blower, meant for rectangular port heads (ls3/l92) want to trade for a 1000hp turbo setup including hot pipes, turbo, and cold side?

 

Where are you located? Parts list on the 402?

 

Well actually, I think I would rather trade my turbo stuff for a blower instead of the engine.

Turbo stuff consists of truck manifolds, crossover in front, everything stainless and professionally welded, vbands on everything, dual jgs50mm wastegates, completely divided t6 flange. Ports for exhaust back pressure, o2 sensors for both sides, and egt gauge. Turbo is a BW s400-82mm compressor and 96mm turbine, 3" outlet 5.5" inlet race cover with about 500 miles on it. Downpipe is 5" stainless mandrel bend with wideband o2 bung. Pipes also have about 200ft of wrap on them, double and triple wrapped in some places. Cold side is 3" from turbo to intercooler, huge intercooler, and 3" stuff to TB.

No problems out of the kit, pushes my 5000lb truck to 115mph in the 1/8th and 6.0x ets. Just want to go a different direction with the build.

Located in Huntsville, AL.

 

I would have figured you were drunk when you posted this last nite...now I see your serious. Why a 1900 and not a 2300? Once you've had the kinda power your making I imagine it would be hard to go back to a measly 6-800hp.

 

Too bad my tvs1900 is for cathedral heads...I am up in chatanooga

 

Whats the price on the complete kit

 

Jake sells his truck and now everyone is doing it hahaha

 

That's what I thought too, either that or the world is coming to an end! Haha
Good luck with the trade though

 

Wow. I didn't see this comin

 

I may be wrong but I think he may want to know what other parts are in the engine to help this turbo kit produce 1000hp so he can gauge how much power this kit might make on his engine.

Either way good luck