muffler, dmh cutout, 4in tailpipe, u-bends
#1
muffler, dmh cutout, 4in tailpipe, u-bends
I had my exhaust redone and these are the parts I took off/didnt use.
Magnaflow 12599 $130 shipped, brand new never used SOLD!
http://i11.photobucket.com/albums/a1..._08031400x.jpg
http://i11.photobucket.com/albums/a1..._08001400x.jpg
Flowmaster 15929 4" tailpipe kit, brand new, $100 shipped SOLD!
http://i11.photobucket.com/albums/a1..._08021400x.jpg
http://i11.photobucket.com/albums/a1..._08011400x.jpg
Magnaflow 13740 34" case 7" round 3" SI/SO, $40 shipped SOLD!
nice and quiet but still has some bark at WOT, very deep idle
http://i11.photobucket.com/albums/a1..._07991400x.jpg
Summit 3" mandrel bend u-bend, $30 shipped SOLD!
you can have the half of the other one for free
http://i11.photobucket.com/albums/a1..._07971400x.jpg
Flowmaster Y pipe (dual 3" to single 3.5"), stainless 3.5" cutout, dmh 3.5" electric cutout, and a little turndown thing I made. I have the complete wiring and switch and everything works fine, no leaks. I used this with my 3" system even though its 3.5", so it works fine. $150 shipped for all of it SOLD!
http://i11.photobucket.com/albums/a1..._07981400x.jpg
thanks for buying, guys!
Magnaflow 12599 $130 shipped, brand new never used SOLD!
http://i11.photobucket.com/albums/a1..._08031400x.jpg
http://i11.photobucket.com/albums/a1..._08001400x.jpg
Flowmaster 15929 4" tailpipe kit, brand new, $100 shipped SOLD!
http://i11.photobucket.com/albums/a1..._08021400x.jpg
http://i11.photobucket.com/albums/a1..._08011400x.jpg
Magnaflow 13740 34" case 7" round 3" SI/SO, $40 shipped SOLD!
nice and quiet but still has some bark at WOT, very deep idle
http://i11.photobucket.com/albums/a1..._07991400x.jpg
Summit 3" mandrel bend u-bend, $30 shipped SOLD!
you can have the half of the other one for free
http://i11.photobucket.com/albums/a1..._07971400x.jpg
Flowmaster Y pipe (dual 3" to single 3.5"), stainless 3.5" cutout, dmh 3.5" electric cutout, and a little turndown thing I made. I have the complete wiring and switch and everything works fine, no leaks. I used this with my 3" system even though its 3.5", so it works fine. $150 shipped for all of it SOLD!
http://i11.photobucket.com/albums/a1..._07981400x.jpg
thanks for buying, guys!
Last edited by Atomic; 02-20-2010 at 04:52 PM.
#7
I took off the wiring for the cutout today. I also replaced the rocker switch for a toggle I got from radioshack which I like a lot better. Theres a good 25' of wiring.
Ive had a lot of nibbles on the cutout, but no cash yet. I just want to reiterate that even though its a 3.5" cutout you can use it on a 3" system, which is exactly what I had been doing.
Make an offer, still need the cutout and tailpipes gone.
Ive had a lot of nibbles on the cutout, but no cash yet. I just want to reiterate that even though its a 3.5" cutout you can use it on a 3" system, which is exactly what I had been doing.
Make an offer, still need the cutout and tailpipes gone.
Trending Topics
#9
Uh... its 170 miles away and I dont feel like driving that far for a $5 switch so lets say $50 + shipping + my gas bill at 13mpg
I'll sell you the above toggle for $150, and you even get a cutout and collector for free!
But seriously, its just a double-pole double-throw switch. Nothing fancy about it.
I'll sell you the above toggle for $150, and you even get a cutout and collector for free!
But seriously, its just a double-pole double-throw switch. Nothing fancy about it.