Lots of GOOD stuff
07-06-2012, 05:31 PM
#1
Lots of GOOD stuff
ok guys, I dont have any use for this stuff anymore. No hot rod trucks and trying to make the family bigger so some of this has got to move,,,
03 4L80E 2WD trans with converter- Stock with unknown miles, good working order when pulled, fluid is in good shape - $700
pair of 16x10 Eagle wheels with 28x10x16 Hoosier Slicks, good amount of tread left, wheels in good shape, THESE WILL NOT TUCK but worked fine on my old ext cab dropped 3/5 $250
L92 truck intake manifold- Ported by Larry Meaux with a 'Money-Maker" nitrous kit installed capable of flowing over a 400hp wet hit. Completely hidden, TB throat has also been opened up to 92mm, I was planning on running a 95mm, comes with GMT900 engine cover. $450
Innovate LC-1 Wideband controller with 2 1/16" XD-16 gauge kit, has white face installed on XD-16, O2 sensor has been replaced with Bosch sensor and ran but was good when pulled. $250
stock complete grille for 2007 GMT900 Sierra $50
SFI flexplate for LS/4L60E $75
Stock flexplate for LS/4L60E $30
HSW Nitrous kit - complete plate kit, bottle hoses noids etc, comes with switch panel that goes in dash pocket to the left of steering wheel $500
Set of Cal-Tracs for non flip-kit trucks - everything included minus the aluminum bushings for the springs. $250
ALL PRICES ARE MINUS SHIPPING, I dont mind meeting half way within reasonable distance for the cost of fuel for the larger items. If you wish to have an item freighted (such as a trans) I'll assist and drop off but I will not be responsible for setting up freight arrangements or payment of freight arrangements.
03 4L80E 2WD trans with converter- Stock with unknown miles, good working order when pulled, fluid is in good shape - $700
pair of 16x10 Eagle wheels with 28x10x16 Hoosier Slicks, good amount of tread left, wheels in good shape, THESE WILL NOT TUCK but worked fine on my old ext cab dropped 3/5 $250
L92 truck intake manifold- Ported by Larry Meaux with a 'Money-Maker" nitrous kit installed capable of flowing over a 400hp wet hit. Completely hidden, TB throat has also been opened up to 92mm, I was planning on running a 95mm, comes with GMT900 engine cover. $450
Innovate LC-1 Wideband controller with 2 1/16" XD-16 gauge kit, has white face installed on XD-16, O2 sensor has been replaced with Bosch sensor and ran but was good when pulled. $250
stock complete grille for 2007 GMT900 Sierra $50
SFI flexplate for LS/4L60E $75
Stock flexplate for LS/4L60E $30
HSW Nitrous kit - complete plate kit, bottle hoses noids etc, comes with switch panel that goes in dash pocket to the left of steering wheel $500
Set of Cal-Tracs for non flip-kit trucks - everything included minus the aluminum bushings for the springs. $250
ALL PRICES ARE MINUS SHIPPING, I dont mind meeting half way within reasonable distance for the cost of fuel for the larger items. If you wish to have an item freighted (such as a trans) I'll assist and drop off but I will not be responsible for setting up freight arrangements or payment of freight arrangements.
Last edited by silver-mod-o; 08-13-2012 at 09:13 AM.
07-06-2012, 11:02 PM
#7
add 25 for the spindles because of weight and probably 15 for the fans due to how bukly they are. I'll be able to get exact prices once theyre packed and weighed but thats probably gonna be a close guess.
everything will be shipped with insurance and signature delivery, and well wrapped/packaged.
everything will be shipped with insurance and signature delivery, and well wrapped/packaged.
