It's off the truck and ready to ship. Kenne Bell 2.8l hi boost 1bar compressor housing. Comes with IW over driven balancer, complete 8 rib drive with HD tensioner. 4", 3.75" 6 rib pulleys and 3.650", 3.25" 8 rib pulleys. made 15psi with the 3.650" pully on my 5.7 LS1.

Fits 99-07 trucks with cathedral port heads, and 07+ 5.3's with cathedral port heads.

What you see in the pic is what you will get (except for the down pipes, ). I'm gonna give this a few days and then will see about parting it out. Let me know if you have any questions.

$4000 Plus shipping and PP

 

Come on guys I know somebody wants this! If you want it with out the 8 rib, I sell it that way to save you some money. I was running the 3.75" 6 rib pulley and stock crank pulley at about 10-11 psi with very little belt slip.

 

If my Arctic Cat sells tomorrow I am going to contact you about this setup. To make this a complete setup for an 07 Avalanche what would I need. I already have the tuning covered.

 

For the most part just fuel injectors and a pump upgrade. Pretty much everything here for the blower.

 

Man the more I look at what you have I think its way overkill for my needs, somebody wanting to move out fast needs this kit not a trailer puller like me.

 

Bump!

 

grrr this is getting really tempting.... i sometimes wanna say screw saving up for my house..

free bump !!!

 

I'm moving to the north Houston area in a couple of weeks and this could still work on your truck with a bigger pulley. I'd sell it in the price range you looking for with just the 6 rib drive setup.

 

i would like the fuel lines....

 

Well if you are willing to help me with getting everything I need and taming it down I am very interested again. From past experience with my Cobra and Procharged TA belt wrap and the extra ribs were only an issue with higher RPM. I drive this thing like a grandpa and tow with it so I should be fine. I will PM you my number and lets see what we can come up with, I have the cash sitting here burning a hole in my pocket .