cam soldCam is 215 230 117 (629 595 Lift) has 10k miles on it no wear. Truck ran 12.96 with this cam after switching to 232 236 113+2 I ran 13.11. I'd like to swap this cam back in but don't have the cash to pay someone to do it again.-200 bucks

yank ss3800 for 4l60e 300m....hS 200 miles on it then I broke the sprag I think. It was instaled for 2 days. 500 bucks this was 750 new

bottom half of a fast 102 lsxrt intake ported by tea. I thaught I cracked mine so I ordered a new one and turns out I just needed to cap the back vacume line lol! I paid 400 plus shipping il sell it bran new with orings for 300

I will also trade +cAsh for 4l80e harness/x member/ driveshafts/ or of course 4l80e!

 

Bump..

 

You have a welder and chop saw or sawzaw? Modify your stock x member thats what I did. And as far as the harness you wont need. Just repin the stock trans harness plug in (pull apart and swap two wires) and just find you a vss connector to run to the extra vss plug the 80e will have.

https://www.performancetrucks.net/fo...d.php?t=413157

 

Here's what you will need for the vss plug in on the 80e. Splice in some wire into this and run them to the pcm and pin them in #22 & #23
http://cgi.ebay.com/ebaymotors/T56-V...Q5fAccessories

 

you have a Gen III 6.0 right??? dude its soooo easy to swap the cam! you can have it done in 4 hours taking your time.

if you was closer id come help you.

 

If you want to swap out your cam, let me know. I am only about 40 minutes from you and I could come give you a hand. Let me know man...

 

Wow you guys are very helpful I really appreciate it!! And I may take u up on that offer sonoma 43! I would really like to learn how I wouldn't mind doing one on someone elses truck/ car just to learn! I am going to focus on my trans first but I'm really going to think hard about putting that old cam back in!

 

Let me know when you want to do it and we'll figure out a time. Like said it doesnt take very long, and since you dont have to do spring swap it isnt bad at all! No need to pay someone 200$ for just a couple hours of work. Grab a gasket kit, and some coolant and we'll swap that cam out sooner than later!

 

do u have pics of the fast lsxrt and will it fit a 408 pm me with info please

 

Yes I do have pics of it what's your email address and it will fit a 408 but it's only the bottom half of the intake. You would still need the runners and shell