FS: Stuff and highmile 5.3L, PS2
#1
Got some stuff sitting around i need gone
everthing Price PLUS SHIPPING and all is OR BEST OFFER
1 - 6.0L Flexplate for 4L80E, came on my 6.0L out of a '01 HD - $50
1 set - Stock manifolds from 5.3/6.0L - $50 set OBO
1 set - Door/bed molding from '01 Silvy ECSB All black - make offer
1 - Stock '01 Silvy 5.3L intake tube W/boot - $10 OBO
1 - Stock "modded" airbox, bottom punched out W/Newish filter - Make offer
1 - Stock Fan and clutch (clutch still good) - $30
1 - Stock fan shroud - $20
1 - 5.3L longblock, 278,000 miles. - $250 OBO
Pickup only or possible to bring it to truck shootout.
Ran when pulled, did use some oil due to valve seals being old.(when i pulled th eintake i could see oil sitting on top of the valves.) Ran strong for the mileage. Held decent oil pressure (Cant remember exactly but around 40-50 psi driving.) Still got around 16 mpg in my ECSB. Engine didn't knock other than the typical LS motor sounds considering the mileage. I pulled the engine because I did a 6.0L swap. Its a 2001 5.3L motor still put together, DOES NOT COME WITH THE INTAKE/TB/INJECTORS OR THE COILS! I really don't need this engine for anything and its in my buddys shop floor in the way. This would be a ideal engine to throw into something and spray the hell out of it. Lol if it stays here too much longer thats probably whats gonan happen to it. It CAN be run in something without being built or anything but I wouldnt personally go through the trouble because it does have 278K on it and it did use oil, but no visible smoke or anything. It would probably work pretty decent if the heads were redone or you swapped on some lower mileage heads.
and Also have a PS2 with a few games - $75
Its the original not the SLIM. Never had any trouble out of it But I want a new Blu Ray or something instead of using this to play my DVDs. I dont use it anymore. I have a few games for it like GT3 A Spec, some MEDAL of HONOR something, Ford Racing 3(i think), NHRA Drag racing, and a couple other games also....Ill include a Memory card that has LOTS of Cars Fully Modded on GT3. I have 1 controller, the other one broke. Its a upgraded one with a cooling fan for your hands. Cannot say 100% if every button on it works. I have played a game in a while.
everthing Price PLUS SHIPPING and all is OR BEST OFFER
1 - 6.0L Flexplate for 4L80E, came on my 6.0L out of a '01 HD - $50
1 set - Stock manifolds from 5.3/6.0L - $50 set OBO
1 set - Door/bed molding from '01 Silvy ECSB All black - make offer
1 - Stock '01 Silvy 5.3L intake tube W/boot - $10 OBO
1 - Stock "modded" airbox, bottom punched out W/Newish filter - Make offer
1 - Stock Fan and clutch (clutch still good) - $30
1 - Stock fan shroud - $20
1 - 5.3L longblock, 278,000 miles. - $250 OBO
Pickup only or possible to bring it to truck shootout.
Ran when pulled, did use some oil due to valve seals being old.(when i pulled th eintake i could see oil sitting on top of the valves.) Ran strong for the mileage. Held decent oil pressure (Cant remember exactly but around 40-50 psi driving.) Still got around 16 mpg in my ECSB. Engine didn't knock other than the typical LS motor sounds considering the mileage. I pulled the engine because I did a 6.0L swap. Its a 2001 5.3L motor still put together, DOES NOT COME WITH THE INTAKE/TB/INJECTORS OR THE COILS! I really don't need this engine for anything and its in my buddys shop floor in the way. This would be a ideal engine to throw into something and spray the hell out of it. Lol if it stays here too much longer thats probably whats gonan happen to it. It CAN be run in something without being built or anything but I wouldnt personally go through the trouble because it does have 278K on it and it did use oil, but no visible smoke or anything. It would probably work pretty decent if the heads were redone or you swapped on some lower mileage heads.
and Also have a PS2 with a few games - $75
Its the original not the SLIM. Never had any trouble out of it But I want a new Blu Ray or something instead of using this to play my DVDs. I dont use it anymore. I have a few games for it like GT3 A Spec, some MEDAL of HONOR something, Ford Racing 3(i think), NHRA Drag racing, and a couple other games also....Ill include a Memory card that has LOTS of Cars Fully Modded on GT3. I have 1 controller, the other one broke. Its a upgraded one with a cooling fan for your hands. Cannot say 100% if every button on it works. I have played a game in a while.
Thread
Thread Starter
Forum
Replies
Last Post
lxcoupe
GM Parts Classifieds
3
Sep 25, 2015 12:36 PM



