FS: set of 317 heads
#1
Thread Starter
Joined: Apr 2007
Posts: 14,593
Likes: 900
From: JunkYard
Very little run time. They were take offs for a cng conversion on a newer truck.
Will ship fed Ex Ground Or what ever you want with a traking number .
2 boxes @ 24 LBS 21 long 6 high 9 deep
Im in 92845 so you can look up shipping... probally between $55-$65
asking $200 plus actuall shipping
I take pay pal too!
Will ship fed Ex Ground Or what ever you want with a traking number .
2 boxes @ 24 LBS 21 long 6 high 9 deep
Im in 92845 so you can look up shipping... probally between $55-$65
asking $200 plus actuall shipping
I take pay pal too!
#3
Thread Starter
Joined: Apr 2007
Posts: 14,593
Likes: 900
From: JunkYard
As stated they were Take offs for a cng Converssion... The work was done at the dealer. For the conversion, you need a head with special hardened seats and soduim filled valves for the added heat. They only use new factory parts at the dealer to do the conversion so you can maintain the factory warranty on the engine. If you look at the valves you can still see the factory Marks on the face validating the low miles. I did not even attempt to clean them up. I see heads with 100,000 Plus miles on them that you know are going to need to be rebuilt sale all the time for $200.
I feel these are a much better starting point.
To answer your question NO there is nothing wrong with them.
I feel these are a much better starting point.
To answer your question NO there is nothing wrong with them.
Thread
Thread Starter
Forum
Replies
Last Post
GrooveCityZ71
GM Engine & Exhaust Performance
7
Aug 31, 2015 12:05 PM








