When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got a deal on a short block so I ended up not using either of these. They are new in the original packaging as shown. Im not going to use these anytime soon so I might as well find them a new home.
Are the scat rods for stock pistons? I need a set of gen 4 rods anyway, are these better?
Yes they are for a stock .944 pin. They already have an arp 8740 bolts in them.
They are similar in design to a gen 4 style rod. They should be as strong or stronger since they are not powered metal.
They machining on a factory rod is not the best. Sometimes they have to be honed .002 oversized on the big end to be straight. I was tired of chasing good sets of rods and spending extra money on machining and ARP bolts.
I was going to use these in my recent build but I got a great deal through SDPC on a short block so I went that route instead.
Jul 20, 2017 | 12:22 PM
FS: NEW Manley Rods and Scat Rods in the box
