FS: LS1 382 Stroker Setup
Jun 3, 2007 | 01:11 AM
#1
Thread Starter
TECH Resident
iTrader: (45)
Joined: Nov 2001
Posts: 959
Likes: 1
From: Michigan, the land of cold
FS: LS1 382 Stroker Setup
I would like to sell the following items as one deal.
Eagle 4" Stroke Crank
Forged H-Beam Rods w/ ARP bolts
Mahle -26cc dished pistons w/ rings
Assembly has been fully balanced by local speed shop
$1650 + shipping for the rotating assembly
This assembly was used for an engine for my Trans Am, it's been run but no mileage on it. I'm putting the car back to stock. The pistons are mounted to the rods, the rings have been gapped and installed on the pistons. All parts are labeled to ensure proper assembly.
Will part out as follows: pistons w/ pins and rings for $450, rods for $400, the crank for $900.
If you are using Paypal, add 3% to the price.
Eagle 4" Stroke Crank
Forged H-Beam Rods w/ ARP bolts
Mahle -26cc dished pistons w/ rings
Assembly has been fully balanced by local speed shop
$1650 + shipping for the rotating assembly
This assembly was used for an engine for my Trans Am, it's been run but no mileage on it. I'm putting the car back to stock. The pistons are mounted to the rods, the rings have been gapped and installed on the pistons. All parts are labeled to ensure proper assembly.
Will part out as follows: pistons w/ pins and rings for $450, rods for $400, the crank for $900.
If you are using Paypal, add 3% to the price.
Last edited by ChevyThunder17; Aug 18, 2007 at 11:29 PM. Reason: Price reduction/change of terms
I really am.
Trending Topics
Jun 14, 2007 | 07:59 AM
#9
Thread Starter
TECH Resident
iTrader: (45)
Joined: Nov 2001
Posts: 959
Likes: 1
From: Michigan, the land of cold
Bump up again. 
Somebody buy this: listening for reasonable offers. I want to get my TA running and make the Avalanche faster. Help a guy out!
Somebody buy this: listening for reasonable offers.
I want to get my TA running and make the Avalanche faster. Help a guy out!
Last edited by ChevyThunder17; Jun 14, 2007 at 03:58 PM.
