FS: LS1 382 Stroker Setup
#1
FS: LS1 382 Stroker Setup
I would like to sell the following items as one deal.
Eagle 4" Stroke Crank
Forged H-Beam Rods w/ ARP bolts
Mahle -26cc dished pistons w/ rings
Assembly has been fully balanced by local speed shop
$1650 + shipping for the rotating assembly
This assembly was used for an engine for my Trans Am, it's been run but no mileage on it. I'm putting the car back to stock. The pistons are mounted to the rods, the rings have been gapped and installed on the pistons. All parts are labeled to ensure proper assembly.
Will part out as follows: pistons w/ pins and rings for $450, rods for $400, the crank for $900.
If you are using Paypal, add 3% to the price.
Eagle 4" Stroke Crank
Forged H-Beam Rods w/ ARP bolts
Mahle -26cc dished pistons w/ rings
Assembly has been fully balanced by local speed shop
$1650 + shipping for the rotating assembly
This assembly was used for an engine for my Trans Am, it's been run but no mileage on it. I'm putting the car back to stock. The pistons are mounted to the rods, the rings have been gapped and installed on the pistons. All parts are labeled to ensure proper assembly.
Will part out as follows: pistons w/ pins and rings for $450, rods for $400, the crank for $900.
If you are using Paypal, add 3% to the price.
Last edited by ChevyThunder17; 08-18-2007 at 11:29 PM. Reason: Price reduction/change of terms