I got a set of ceramic coated Long tube headers and custom Ypipe, they have 1 5/8 primaries and 3" collectors... As you can see from the pics they are used and slighly rusting, I am the 3rd owner of these.... I had alot of problems trying to get the drivers side header to stop leaking... I believe the flange need to be planed/sanded to prevent leaking.... Also the previous owner stripped out the O2 sensor bungs so I welded in new ones as you can see in the pics... I am only wanting $150 for the headers and Ypipe cause of the problems I listed above... The Ypipe is painted with High temp exhaust paint and is starting to peal off in a couple of places. I can also throw in the pipe that connects to the Ypipe, it has a flange and ~1ft of pipe.

I really don't want to ship them, so local buyers first, I might decide to ship them later.






You can see where it was leaking past the gasket....













Keep in mind the problems I listed above!!! The drivers side header will need to be planed/surfaced at a machine shop or RTV used on the gasket IMO....

 

pm'ed....very interested

 

will everything you have bolt up to a Gibson cat-back? if so, i am interested

 

Direct boltin no, the midpipe would have to be cut and welded on this y-pipe..

 

if you decide to ship im interested and will also pay shipping
also can you get a shipping quote to 35173 if you do??

 

thanks

 

Shipping would be alot, I am waiting for one member to get back to me thou

 

Whats your new setup consist of?

 

Modified AEM headers and 3" ypipe with a e-cutout... Should be finished in a few days...

 

Bump for the night crowd, I decide I will ship so factor in shipping in an offer...