The block was just cleaned, New cam bearings installed, Line hone touched up, and cylinders de-glazed at 4.060 bore. piston to wall clearance is about .005 for high boost.

Pistons are CP Bullet forged with I believe -11cc dish. Pins and locks included.

Rods are supposed to be Eagle but I am un-able to confirm the exact brand. They are 6.125 in length and were used with these pistons in this block.

Package deal on everything $1200 firm.

Located in Orange County, CA.

 

Dang, I completely wasted my money. Bought a 6.0 that was supposed to be good. It was trashed. I'd have bought this in a heart beat.

 

Will those rods work with a stock crank?

 

Yes. This was a stock crank combo. I Just don't have a good one for it. Unless you want to run a long rear snout crank 99-00 crank.

Last buyer backed out after having it cleaned up.

 

I already purchased a brand new crank for this current 6.0, I need to ponder this for a few.

 

Bump to the top!

Added pictures of rods.

 

Good deal.

 

how far are you from SD

 

Depends where exactly you're referring to.

I'm right near Disneyland.

 

Sent you a PM. PLEASE let me know..
God Bless
John Junkins