fs:383 ls
01-24-2011, 08:56 PM
#1
Teching In
Thread Starter
iTrader: (38)
Join Date: Mar 2010
Location: winnsboro,la
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
fs:383 ls
comes with block already had all the machine work done,forged rotating assembly(balanced with paper work) probe forged pistons and hawks racing hbeam rods and crank, crank and rod bearings, compression is 10.5 with the heads, double roller timing chain,melling high volume oil pump,806 casting heads ported and polished The valves are 5.010 long 11/32 . The EX is 1.60 Manley G-PB 99 grams flat groove Howards Cams forged locks. The intake is 2.02 Ferrea F1118P. The retainers are Exceldyne/CV Products custom. The set up height is 1.860 ex and 1.870 int. Coil bind is at 1.090. 1.860 - 1.090 = 1.770 - .050 min clearance = .720 max possible valve lift. The chambers in the heads are appox 71 cc,truck oil pan and harmonic balancer, front and rear covers,valve covers and spacers for aftermarket rockers,coils and brackets, and a eldebrok vic jr intake,does not include cam,bolts, or gaskets
2500 for everything
just needs to be assembled i can send pics to ur email if serious only
2500 for everything
just needs to be assembled i can send pics to ur email if serious only
