forsale: New Magnaflow 5 x 11 x 22in. Muffler 3.5" in and out
#3
#6
Joined: Jul 2007
Posts: 1,114
Likes: 7
From: Elsa, South Texas (956) 802-7700
#7
Well i installed some pacesetters today! Along with the ory we made it 3.5 inch instead of using the factory exhaust piece. From there we ran 3.5" exhaust into a 5x11x22 si/so 3.5 muffler the we ran it over the axle and dumped it! I am 100% happy with all the tones at every rpm! At cruising it sounds like it's a stock muffler set up! At WOT it screams its lil geart out!
I took the pics with my phone for now we were ready to leave. I will get real pictures this week to show all of the work!
3.5" mandrel 90° over the axle section

Cut a mandrel 3.5" 90° to piece together to get around the axle


Center section picture

Chris at LSx did all the welding and fab work on the after muffler section.
Did mine today! Im a head cam lq4 and its perfect! Super quite at idle and cruising and wot is pure sex!
Mines of course over the axle!!! Anyone looking for a big exhaust setup and quite at same time better ****** this up!!!
Free bump and glws
I took the pics with my phone for now we were ready to leave. I will get real pictures this week to show all of the work!
3.5" mandrel 90° over the axle section

Cut a mandrel 3.5" 90° to piece together to get around the axle


Center section picture

Chris at LSx did all the welding and fab work on the after muffler section.
Did mine today! Im a head cam lq4 and its perfect! Super quite at idle and cruising and wot is pure sex!
Mines of course over the axle!!! Anyone looking for a big exhaust setup and quite at same time better ****** this up!!!
Free bump and glws






perfect.