F/S 8.1 Vortec 04 5 speed 18" wheels Drop Parts ETC.
Sep 26, 2010 | 02:21 AM
#1
F/S 8.1 Vortec 04 5 speed 18" wheels Drop Parts ETC.
Leaf springs with cal trac bushings and sleeves – 80.00
2 inch Mcghauys drop Shackles - 50.00 shipped
Vortec 8.1 8100 496 - 1000.00
It currently is running in my truck. I prefer to sell motors so you can hear them run.
It comes with water pump and thermostat and crossover. returnless fuel line. Intake, exhaust manifolds. I have a y pipe that fits my body style truck that can come with it. I also have automatic flywheel. You will need accessory brackets for 2500 3500 that can use standard ls style accessory or you can buy the medium duty truck brackets and use v6 and older v8 accessory. Which are the ones I have on the motor at the moment. since I went from v6 to this motor. Depending on which brackets you will use depends on which balancer you need.
Since I did alot of research doing this swap I can help anyone do it. I personally recommend running a megasquirt 2 setup on it. but if you have the tuning software I also have the stock 8.1 tune.
I also have the factory wiring harness that I may let go with it.
I may consider trades as well I do need a few things
Feel free to email me
Edward.coss@gmail.com
18 x 9.5 centerline polished wheels 2 have 255/55/18 2 have 285/50/18 nitto tires plus 1 spare 255/55/18 tire-700.00
Front rotors and calipers-60.00
Rear Rotors and calipers-60.00
496 8.1 Vortec 8100 ARP Conversion studs to use normal rocker arms or roller rockers-70.00
2 inch Mcghauys drop Shackles - 50.00 shipped
Vortec 8.1 8100 496 - 1000.00
It currently is running in my truck. I prefer to sell motors so you can hear them run.
It comes with water pump and thermostat and crossover. returnless fuel line. Intake, exhaust manifolds. I have a y pipe that fits my body style truck that can come with it. I also have automatic flywheel. You will need accessory brackets for 2500 3500 that can use standard ls style accessory or you can buy the medium duty truck brackets and use v6 and older v8 accessory. Which are the ones I have on the motor at the moment. since I went from v6 to this motor. Depending on which brackets you will use depends on which balancer you need.
Since I did alot of research doing this swap I can help anyone do it. I personally recommend running a megasquirt 2 setup on it. but if you have the tuning software I also have the stock 8.1 tune.
I also have the factory wiring harness that I may let go with it.
I may consider trades as well I do need a few things
Feel free to email me
Edward.coss@gmail.com
18 x 9.5 centerline polished wheels 2 have 255/55/18 2 have 285/50/18 nitto tires plus 1 spare 255/55/18 tire-700.00
Front rotors and calipers-60.00
Rear Rotors and calipers-60.00
496 8.1 Vortec 8100 ARP Conversion studs to use normal rocker arms or roller rockers-70.00
Last edited by xx_ED_xx; Mar 28, 2011 at 08:04 AM.
Sep 26, 2010 | 10:10 AM
#6
Yes on the nv3500
Unfortunately on the hangars since that is the pic from when i bought them I would have to think they are the 4 bolt. I never used them ended up buying an air bar rear suspension
Unfortunately on the hangars since that is the pic from when i bought them I would have to think they are the 4 bolt. I never used them ended up buying an air bar rear suspension
