Crank with bearings, Cnc heads, 60lb injectors, JE pistons lq4 rods
10-13-2013, 10:10 AM
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Jul 2011
Location: Ft. Bragg NC
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Crank with bearings, Cnc heads, 60lb injectors, JE pistons lq4 rods
Stock lq4 crank, king bearings crank and rod, balanced, turned .010 main and .020 rod Came from engine that spun bearing crank is ready to install and keyed. $350
Cnc ported 317's from LPE (ligenfelter) complete with valves and springs $450
60lb Siemens p/n107961 was told they've been flow matched and have 2000 miles acquired them from a trade $300
Forged JE pistons and wrist pins stock 6.0 bore removed at 60k also cam from engine that spun bearing no rings or wrist pin clips $300
Lq4 rods $75 all 8 + 2 ls2 rods
***Looking for shorty injectors for my magnacharger set up, ls7 springs or better, hp tuners pro, fuel pump set up.***
Cnc ported 317's from LPE (ligenfelter) complete with valves and springs $450
60lb Siemens p/n107961 was told they've been flow matched and have 2000 miles acquired them from a trade $300
Forged JE pistons and wrist pins stock 6.0 bore removed at 60k also cam from engine that spun bearing no rings or wrist pin clips $300
Lq4 rods $75 all 8 + 2 ls2 rods
***Looking for shorty injectors for my magnacharger set up, ls7 springs or better, hp tuners pro, fuel pump set up.***
Last edited by Yukon04; 10-13-2013 at 01:38 PM.
