Dynatechs come uncoated but made out of good stainless and 2.5" collectors. The collectors were cut short to weld on 3" collectors and then ceramic coated to do away with the heat build-up under the hood that is typical of SS and uncoated headers. The ceramic coating job covers the headers very well and thick but there are a couple of drips but nothing bad, only one is really visible when they are installed. These headers have 3K miles on them after being coated. These headers are in really good condition no dings at all just a couple of scratches from removal. Im asking 600+shipping for them since they go for 900 plus 300 for coating.

Scratch where the heatshield was rubbing on it before I fixed the heat shield not noticeable when installed since it faces the firewall mostly and down kinda low


Dynatech emblem

Couple of the install/remvoal "scratches" that would probably polish out Im just lazy

The main drip that is noticeable when installed but isnt very bad at all IMO

No low ball offers please, these are well worth the money. Im getting rid of them because Im putting an STS kit on my truck and the gains from these headers are very minimal with the backpressure created by a turbo.

 

Those are sweet, I wish I had the $$ but I'm a little short right now. Bump for ya!

 

Thanks Trever, I need these gone so I can buy my pt-88

 

Bump.

 

Very interested (and semi-local). What were you using for a y-pipe? Just curious how much fab work would be needed to bolt 'em up.

 

Yeah, you'd need his custom made y pipe as well unless you wanted to make your own. That is if he wanted to get rid of it. I think he has a couple of cut-outs in it

 

You would either need to get a custom y built or I could sell you the one that I have been using for 100. I got a local guy that is interested in it but Ill find out whether he wants it for sure or not. It has two 3" cutouts on it also, one behind each collector so basically you are running open header when you open the up for the track or if you just want to be rediculously loud. Ill find out today if the guy wants the y-pipe or not. Shoot me a PM if you are serious. Im coming down in two weeks to Houston I could meet up with you while Im down.

 

what y with cats would bolt up to headers for my tahoe? It would have to bolt up to my corsa also.

 

You will have to have a y-pipe made at a shop or buy a dynatech y and cut the 2.5" 3-bolt flange off and get 3" 3-bolt flanges welded onto them.

 

Come on somebody buy these so I can buy more goodies