these part where pull out of a running motor with 5 k. . .


summit part number / price new

crn-1449561 / $419.95
Crane Quick Lift Hydraulic Roller Camshafts
Duration at 050 inch Lift: 216 int./224 exh.
$199.99 + shiping



CSP-SLS18 / 399.95
Harland Sharp Shaft Mount Roller Rockers
Rocker Arm Ratio: 1.8
$199.99 + shiping



I LIVE IN POMONA KS. 66076. . .

 

How many miles on cam? Great deal for someone. About perfect size for a nice street cam for a 6L

 

5000 AT THE MOST... I WAS UNHAPPY WITH THE COBO IN MY 408...

 

did it lope at all...very interested. would z06 springs and rods be sufficient? Do i need new roller rockers?

 

what motor are you puting it in... i had it in my 408... and its a very mild cam for my big ci. ~ ~ ~ in a smaller ci motor it will be alot more aggressive.. i m not 100% on your springs.. and you should get a push rod checker so you can get the right length. far as the roller rockers go .. you dont need them but that are nice to have ... gives you more duration and eazy on your components...

ooo and a good set of lifter will be key as well...

hope that help
josh

 

it would go in my lq4 6.0 in my denali. sounds like the cam is the cheap part. I gotta buy pushrods, springs, roller rockers, and lifters?

 

i have the 1.8 roller rocker i can sale you too.
the pushrods i dont no.. you need to pushrod checker.. that will tell you the length you need. you might be able to get by..
i would upgrade to ls7 lifter and upgrade the springs two.. but thats just me...

if your are new to this ... if i was you i would throw up a thread and ask some other members to be shure it fits your application

to put this stuff in you are going to need some special tool's .. like degree kit, light sprig, pushrod checker.

 

im a college kid, with no time or experience on my hands i would pay for the install. But thanks for all your help

 

pm sent