GM Parts Classifieds For Sale and Wanted

BNIB Roush TVS 1900 Kit

Thread Tools
 
Search this Thread
 
Old Dec 17, 2012 | 11:26 AM
  #1  
snell1884's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Mar 2010
Posts: 3
Likes: 0
Angry BNIB Roush TVS 1900 Kit

Crap!!! Doesn't fit (see pic) I don't want to cut a hole in the hood...so I need to sell this kit (complete). Never used just placed on top of engine to check clearance. All the info you need is in this forum. Search "Roush TVS 1900"
I want $4000.00 plus shipping. I can pallet the boxes and send them that way, some others on here had some damage to their kit by UPS. Everything is in it's original packaging so I could UPS them as well, up to you.

BTW this DOES fit under pickup and suv hoods. for 4.8l 5.3l 6.0l Gen iv. But can be used with Geniii with very little modification.


Specs are as follows:

It features the all-new Eaton TVS 1900 Supercharger with integrated intercooler.

This package is the culmination of over one year of on-road and dynamometer testing and validation. The kit safely provides 9 psi of boost creating stump-pulling torque and neck-breaking acceleration. At the flywheel, this kit increases the power and torque of the 5.3L to 450 HP and 450 ft.-lbs. respectively.

This supercharger package provides an OE appearance under the hood and includes all necessary mounting hardware.


Installation:
*4-6 hour total install time
*Not required to drain cooling system
*Not required to cut or modify base vehicle
*Vehicle can be returned to stock if required

Included:
*Supercharger/Manifold Package
*Low Temp Intercooler Radiator
*Intercooler Reservoir
*Mounting and Wiring Hardware
*New Accessory Drive Hardware and Belt
*High-Flow Fuel Injectors - 42 Lb Per Hour
*Colder Heat Range Spark Plugs
*New Supercharger to Airbox Intake Tube
*Customers must purchase the following two items, from their local dealer, not included in this kit: TMAP Sensor (GM P/N: 90423637) TMAP Wiring Jumper (GM P/N: 88988320)
*It is suggested that customers also purchase the following from their local dealer:Intake Gasket Kit (GM P/N: 89060413)
*Kenne Bell Boost-A-Pump OR Magnuson Magnavolt - Is Strongly Suggested
*Tune is needed, I recommend Blackbear Performance.

This new unit fits these Chevrolet and GMC Trucks and SUVS:
*2007 & up Chevrolet Silverado 5.3 Liter New Body Style
*2007 & up GMC Sierra 5.3 Liter New Body Style
*2007 & up Chevrolet Tahoe 5.3 Liter
*2007 & up Chevrolet Suburban 5.3 Liter
*2007 & up Chevrolet Avalanche 5.3 Liter
*2007 & up GMC Yukon 5.3 Liter
*2007 & up GMC Yukon XL 5.3 Liter

ROUSH P/N: 403260
Attached Thumbnails BNIB Roush TVS 1900 Kit-blower.jpg  

Last edited by snell1884; Dec 20, 2012 at 09:17 AM. Reason: left important info out
Reply
Old Dec 17, 2012 | 05:33 PM
  #2  
iamkeniff's Avatar
Moderator
iTrader: (16)
 
Joined: Apr 2007
Posts: 5,365
Likes: 3
From: Gonzales, la
Default

Where are you located?
Reply
Old Dec 17, 2012 | 06:22 PM
  #3  
ak2007r6's Avatar
TECH Veteran
iTrader: (1)
 
Joined: Aug 2011
Posts: 4,104
Likes: 0
From: Alaska
Default

Didn't take a few measurements before buying???



GLWS
Reply
Old Dec 17, 2012 | 07:17 PM
  #4  
beastmode's Avatar
Import Moderator
iTrader: (52)
 
Joined: Jul 2006
Posts: 7,041
Likes: 0
From: Pittsburgh, PA
Default

Damn.. looks so close to fitting too. Glws
Reply
Old Dec 17, 2012 | 07:18 PM
  #5  
TX Tahoe Z71's Avatar
TECH Junkie
iTrader: (28)
 
Joined: Nov 2004
Posts: 3,836
Likes: 5
From: Houston, Texas
Default

Killer price, GLWS!
Reply
Old Dec 18, 2012 | 12:19 AM
  #6  
Rockafella's Avatar
Teching In
iTrader: (2)
 
Joined: Jun 2003
Posts: 18
Likes: 0
From: WideAwake Wilson, NC
Default

What does it take to make this work on a gen III 6.0L? Got a 2004 LQ9 that would love this setup!
Reply
Old Dec 18, 2012 | 09:14 AM
  #7  
snell1884's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Mar 2010
Posts: 3
Likes: 0
Default

Originally Posted by ak2007r6
Didn't take a few measurements before buying???



GLWS
Not so cut and dry when going in a Datsun. Have it mounted as low and as far back as possible. Also have a cowl inducted hood. Snout just hangs out there a little too far.
Attached Thumbnails BNIB Roush TVS 1900 Kit-side-view.jpg  

Last edited by snell1884; Dec 18, 2012 at 09:27 AM. Reason: spell
Reply
Old Dec 18, 2012 | 09:16 AM
  #8  
snell1884's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Mar 2010
Posts: 3
Likes: 0
Default

Originally Posted by iamkeniff
Where are you located?
Missoula Montana 59801
Reply
Old Dec 18, 2012 | 09:22 AM
  #9  
snell1884's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Mar 2010
Posts: 3
Likes: 0
Default

Originally Posted by Rockafella
What does it take to make this work on a gen III 6.0L? Got a 2004 LQ9 that would love this setup!

Here is a link:
https://www.performancetrucks.net/fo...vs1900-460886/
TIMZ did a great write up...

Last edited by snell1884; Dec 18, 2012 at 09:40 AM. Reason: spell
Reply
Old Dec 18, 2012 | 09:48 AM
  #10  
snell1884's Avatar
Thread Starter
Teching In
iTrader: (3)
 
Joined: Mar 2010
Posts: 3
Likes: 0
Default

Originally Posted by beastmode
Damn.. looks so close to fitting too. Glws
It's real close...just the pulley and end of the snout.
Attached Thumbnails BNIB Roush TVS 1900 Kit-top-view.jpg  

Last edited by snell1884; Dec 18, 2012 at 10:29 AM.
Reply



All times are GMT -5. The time now is 01:49 AM.