I am going to be switch to the 80e and need a crossmember...dont really want to spend $350 on a premade one when it can be done in 30 minutes with a welder and some bar stock.

Im willing to pay you for your time, send me a PM if you are interested.

 

Hm, I'll think about it.

 

If I could justify buying a welder I would do it.

 

Do you need a factory 80e crossmember?

 

Hmm, if they frame horns are the same width on the 80e member as the 60e member then I might cold use it, but it seems a modified 60e is what I really need.

 

pm'd i can do it for ya

 

I would possibly be interested in one as well if the price is right.

 

pm camarozach . . .

 

I'm always down for makin some ca$h!!! Never built one of these conversion x-members, but I fab/weld for a living so I'm as certain as tha Cowboys not playing in the SuperBowl that I can handle it!

 

If you strike out, you could hit up Justin at EAD for their 4L80E conversion tab. It ran $35 when I ordered their AWD input gear and carrier. I've ran it for over a year without any problems.

http://www.eadperformance.com/4l80eSSS/

Rick