Accel DFI Gen 6 74022-A (TPI Motors)
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2013
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Accel DFI Gen 6 74022-A (TPI Motors)
SOLD
Price drop to $290 OBO
Selling a very complete Accel DFI Gen 6 engine management system. Was working properly when upgraded to Gen 7. Some of the harness wires were shortened and tucked into the loom to clean things up, for example knock and O2 sensor connections. Everything seems to be labeled well. Includes the following items:
DFI ECM batch fire part# 74022-A
Engine harness
Fuel injector harness which plugs into main
Calibration interface cable for laptop (old school serial port)
Cockpit A/F ratio controller, allows on the fly adjustment for idle and WOT
Calmap software version 6.0 and 6.32 provided via digital transfer, also latest version on floppy disk
User's guide
Museum quality laptop with a good old fashioned serial port that will work right out of the box but getting data in and out of the computer is a challenge without using floppy disks. There are usb to serial adapters out there that can be used however newer laptops might require some tweaking to get them to work.
Not seeing a lot of these on ebay and elsewhere so not sure how best to price it, I'll adjust as I go. How about $320 or best offer?
Price drop to $290 OBO
Selling a very complete Accel DFI Gen 6 engine management system. Was working properly when upgraded to Gen 7. Some of the harness wires were shortened and tucked into the loom to clean things up, for example knock and O2 sensor connections. Everything seems to be labeled well. Includes the following items:
DFI ECM batch fire part# 74022-A
Engine harness
Fuel injector harness which plugs into main
Calibration interface cable for laptop (old school serial port)
Cockpit A/F ratio controller, allows on the fly adjustment for idle and WOT
Calmap software version 6.0 and 6.32 provided via digital transfer, also latest version on floppy disk
User's guide
Museum quality laptop with a good old fashioned serial port that will work right out of the box but getting data in and out of the computer is a challenge without using floppy disks. There are usb to serial adapters out there that can be used however newer laptops might require some tweaking to get them to work.
Not seeing a lot of these on ebay and elsewhere so not sure how best to price it, I'll adjust as I go. How about $320 or best offer?
Last edited by bytecode; 05-28-2016 at 09:48 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Time2Kill
MASS Used Parts
8
12-29-2020 11:36 AM
BigBlock90
GMT 800 & Older GM General Discussion
34
04-20-2016 12:48 PM
Rockgirl4life
GM Drivetrain & Suspension
2
04-01-2016 12:25 AM
TwistedBigRig
Tuning, Diagnostics, Electronics, and Wiring
2
03-30-2016 08:21 PM
pdog
Tuning, Diagnostics, Electronics, and Wiring
4
03-10-2016 07:14 PM