918s, pushrods, slightly P&P'd 706s
#1
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Apr 2007
Location: Douglasville, GA
Posts: 1,278
Likes: 0
Received 0 Likes
on
0 Posts
918s, pushrods, slightly P&P'd 706s
I am going to be pulling my slightly ported and fully hand polished 5.3(#706) heads off of my truck this weekend, I did some minor porting/mainly smoothing the rough edges and enlarging the runners, and then I went back and polished them.so they should flow alittle better than stock, or you could have some ls1 size valves put in them for cheap, and they'd flow even better. $100 plus shipping(firm) unless your real close to GA is gonna be about $50 or so.
I'll also have a used set of comp cam 918(the revised ones) with 2k miles on them $125 shipped and a hardened set of 7.4 manley pushrods with about 10k on them $55 shipped.
If your interested in anything let me know.
I'll also have a used set of comp cam 918(the revised ones) with 2k miles on them $125 shipped and a hardened set of 7.4 manley pushrods with about 10k on them $55 shipped.
If your interested in anything let me know.