I parted out a truck I had previously, looking to sell the crossmember as well as the front and rear driveshafts. Cross member is a stock one that has been welded and painted, it looks factory and fits perfect. The rear driveshaft is aluminum from an 04 Silverado SS that has been professionally shortened and balanced. The front is a new driveshaft for a 2500 that is longer than the stock 1500 I believe. Not wanting to ship anything at the moment. Looking to get 350 picked up in Grand Rapids MI

I Also have a Billet Circle D triple disk converter for a 4l80e with a 3 bolt front that has some smoke damage from an underhood fire that I would sell as well. Converter helped a stock weight SSS go 1.5x 60ft. I would probably have the converter cleaned and flushed. I believe it is a 258mm but will have to check with Chris at Cirlce D. Converter was 1,200 new and I believe a rebuild and stall is 250ish to have them do it. Converter was never used after fire but fluid in it is red, however the billet face is now blackened from the smoke. Looking for 500+shipping since I can not guarantee condition. I did speak with Circle D and he seen no problem to go through it. Also have a circle d sfi flexplate I will throw in with it.

 

PM sent

 

I'd be interested in the shafts... if you change mind about shipping

 

PM'd sent.

 

I'd be interested in the cross member if you'll ship. Thanks

 

PM sent on converter.

 

Pms replied to thanks!

 

I didn't get a PM.

 

What is the stall on the converter?

I am interested, pending stall speed, how much to a business address in 95666?

Thanks!

 

Sorry have not been on in a bit, converter and flexplate are sold.