4l60e,lowering kit, sway bars,tranny parts,etc
Dec 16, 2007 | 12:23 PM
#1
Thread Starter
TECH Veteran
iTrader: (24)
Joined: Jun 2005
Posts: 4,787
Likes: 1
From: Austin,TX Name:Mark
4l60e,lowering kit, sway bars,tranny parts,etc
I have a bunch of random **** for sale.
1.) 4l60e transmission out of a 99 silverado 5.3L. It was removed at 76,000 miles and has never had a single problem with it. No slipping, fluid was still red when removed, serviced by dealer regularly,etc. The only thing wrong with it is that the park neutral safety switch has a piece of one of the connectors chipped off. It is literally <$50 part and the chip doesn’t even affect performance. I am willing to replace it at the buyers expensive. $400
2.) 4l60e hardened input shaft. Here’s the exact specs from the company: Fits 4L60E / 4L65E. This hardened output shaft is strengthened over the stock 4L60E shaft with selective shot peening, which concentrates the peening process to high-stress sections of the shaft. (Will not work on 2WD transmissions with gear driven speed sensors.) 2WD $137.00. I paid $137 and it’s brand new so I’ll take $100 shipped
3.) Next up is a belltech tahoe 2/3 lowering kit. The kit is complete with Front keys, rear springs, belltech shocks, and limiting straps. It is in good used condition. The only issue with it is that one of the limiting straps has began to fray from rubbing. It still worked fine, but it may be worth replacing. Belltech is the only kit that includes them anyways so they aren't needed. The kit goes for $464 from stylin’ concepts: http://www.stylintrucks.com/parts.as...5&partid=23003
I’ll take $275 plus shipping for it.
4.) Next is a front sway bar kit for a 00-06 tahoe/Yukon,escalade,or Denali. It includes endlinks and everything needed to install it. It goes for $154 from stylin http://www.stylintrucks.com/parts.as...5&partid=36139. I’m asking $100 for it
5.) Next is a rear sway bar kit for an 00-06 tahoe/Yukon,escalade, or denali. It also includes everything needed for the install. $150 from stylin http://www.stylintrucks.com/parts.as...5&partid=36142. I’m asking $100 also for it
6.)Next is a superior intermediate billet servo. I bought this off of FullThrottleDan and ended up going with a corvette servo. I paid $55 shipped from him. I’ll take $50 shipped for it. It may need a new o-ring, but you can get those from Napa. It’s exactly as I got it from Dan.
7.) Next are a pair of Diamond Audio D6 subwoofers. They are dual 2 ohm subs with 600rms each. They are badass subs. They work perfectly. The only thing is that cosmetically, they have 2-3 dents in the center part of the cone from being in my daily driver. They don’t affect the performance of the subs, and you could probably suction cup them out. Aside from that they look brand new. The cheapest price I found for them was $150 a piece. I’ll take $100 each. They will come with original boxes as well.
8.) A set of center caps. They didn’t fit my wheels like I expected. They are in near brand new condition with only very tiny scratches. When I say tiny scratches, I mean ones that aren’t visible unless you are looking at them less than a foot away. I paid $30 for the set and I’ll take $20 shipped. They are 2 1/8” in diameter for measurement purposes.
9.)Transgo separator plate. $10 shipped
10.)Misc 4l60e parts. All in great shape. Some look brand new. If you see something let me know and I'll throw a price out. It'll be cheap
12.) Lock-up solenoid brand new never opened-$12 shipped.
2 pro comp es3000 shocks. Dirty as hell but work great still. $30 shipped for both.
1 belltech nitro drop for a 2wd silverado still works like brand new. Other one is somewhere in my parents shed. $15 shipped.
Stock ypipe with magnaflow 2.5" highflow converters $150 for the whole thing or $50 for each cat.
Stock silverado grill with billet grille $60
I also have an xbox with a few games, 5 controls, and some other misc stuff $60 works fine- SOLD
1.) 4l60e transmission out of a 99 silverado 5.3L. It was removed at 76,000 miles and has never had a single problem with it. No slipping, fluid was still red when removed, serviced by dealer regularly,etc. The only thing wrong with it is that the park neutral safety switch has a piece of one of the connectors chipped off. It is literally <$50 part and the chip doesn’t even affect performance. I am willing to replace it at the buyers expensive. $400
2.) 4l60e hardened input shaft. Here’s the exact specs from the company: Fits 4L60E / 4L65E. This hardened output shaft is strengthened over the stock 4L60E shaft with selective shot peening, which concentrates the peening process to high-stress sections of the shaft. (Will not work on 2WD transmissions with gear driven speed sensors.) 2WD $137.00. I paid $137 and it’s brand new so I’ll take $100 shipped
3.) Next up is a belltech tahoe 2/3 lowering kit. The kit is complete with Front keys, rear springs, belltech shocks, and limiting straps. It is in good used condition. The only issue with it is that one of the limiting straps has began to fray from rubbing. It still worked fine, but it may be worth replacing. Belltech is the only kit that includes them anyways so they aren't needed. The kit goes for $464 from stylin’ concepts: http://www.stylintrucks.com/parts.as...5&partid=23003
I’ll take $275 plus shipping for it.
4.) Next is a front sway bar kit for a 00-06 tahoe/Yukon,escalade,or Denali. It includes endlinks and everything needed to install it. It goes for $154 from stylin http://www.stylintrucks.com/parts.as...5&partid=36139. I’m asking $100 for it
5.) Next is a rear sway bar kit for an 00-06 tahoe/Yukon,escalade, or denali. It also includes everything needed for the install. $150 from stylin http://www.stylintrucks.com/parts.as...5&partid=36142. I’m asking $100 also for it
6.)Next is a superior intermediate billet servo. I bought this off of FullThrottleDan and ended up going with a corvette servo. I paid $55 shipped from him. I’ll take $50 shipped for it. It may need a new o-ring, but you can get those from Napa. It’s exactly as I got it from Dan.
7.) Next are a pair of Diamond Audio D6 subwoofers. They are dual 2 ohm subs with 600rms each. They are badass subs. They work perfectly. The only thing is that cosmetically, they have 2-3 dents in the center part of the cone from being in my daily driver. They don’t affect the performance of the subs, and you could probably suction cup them out. Aside from that they look brand new. The cheapest price I found for them was $150 a piece. I’ll take $100 each. They will come with original boxes as well.
8.) A set of center caps. They didn’t fit my wheels like I expected. They are in near brand new condition with only very tiny scratches. When I say tiny scratches, I mean ones that aren’t visible unless you are looking at them less than a foot away. I paid $30 for the set and I’ll take $20 shipped. They are 2 1/8” in diameter for measurement purposes.
9.)Transgo separator plate. $10 shipped
10.)Misc 4l60e parts. All in great shape. Some look brand new. If you see something let me know and I'll throw a price out. It'll be cheap
12.) Lock-up solenoid brand new never opened-$12 shipped.
2 pro comp es3000 shocks. Dirty as hell but work great still. $30 shipped for both.
1 belltech nitro drop for a 2wd silverado still works like brand new. Other one is somewhere in my parents shed. $15 shipped.
Stock ypipe with magnaflow 2.5" highflow converters $150 for the whole thing or $50 for each cat.
Stock silverado grill with billet grille $60
I also have an xbox with a few games, 5 controls, and some other misc stuff $60 works fine- SOLD
Last edited by RandomHero; Dec 21, 2007 at 12:59 AM.
Dec 16, 2007 | 07:30 PM
#2
2.) 4l60e hardened input shaft. Here’s the exact specs from the company: Fits 4L60E / 4L65E. This hardened output shaft is strengthened over the stock 4L60E shaft with selective shot peening, which concentrates the peening process to high-stress sections of the shaft. (Will not work on 2WD transmissions with gear driven speed sensors.) 2WD $137.00. I paid $137 and it’s brand new so I’ll take $100 shipped
Dec 20, 2007 | 08:11 PM
#5
Thread Starter
TECH Veteran
iTrader: (24)
Joined: Jun 2005
Posts: 4,787
Likes: 1
From: Austin,TX Name:Mark
Pulled because I bought a core off silverbrick and had it rebuilt. $400 is the bottom dollar right now. Not in a hurry to sell it and the price seems more than fair for a perfectly working 4l60e with 76k in highway miles.
