I just swapped out my 42's for 60's. These are the plug-n-play style Delphi 42lb injector #17113739 so they bolt right in without spacers or splicing. They have about 20k miles on them and were working perfectly when I pulled them last week.

$225 shipped.



Thanks, Rick

 

Pm sent

 

pm sent also

 

Hey Fara 04,

I guy from SSSilverado.com pm'd me first. Igave him till 6:00pm tomorrow to paypal the $225 of they are yours. I'll post/pm you either way.

Thanks, Rick

ps:Artypyro is 2nd inline if the deal falls threw.

 

I dont get it. There is another set on here with the same part number but they say to be 44lb injectors??? Im confused, i need injectors.

 

Hey dirty 30,

I double checked my part# so the #17113739 is correct. I bought them as "42's" so it just may be that they were tested at different fuel pressures? When I look up that part number on the web, they come up as 44's. All I am sure about is they work great when programmed at 42lb from my tuner and they are plug-n-play, no splicing or spacers needed. I kind of wish I didn't need the 60's because they were a PITA compared to the 42/44's.

Maybe somebody that knows what the hell they are talking about can chime in and answer it for all of us. :-)

Rick

 

Well I have paypal ready...

 

Depends on how you want to round the numbers. 43# - 44#. Hell they'd be 60# at some crazy fuel pressure.


Part Number 17113739 (OE Part # 25176061) *** Direct fit for short G.M. LS1 SUV injectors ***
Static flow @ 37.95lb/hr @ 43.5PSI / 300KPa (4.31 g/s = 398cc/min)
Static flow @ 43.82lb/hr @ 58PSI / 400KPa (4.97 g/s = 460cc/min) *
Dynamic flow (2.0ms/10.0 ms(pulse width / rep rate)) 6.0 lb/hr @ 43.5PSI (0.748 g/s @ 300KPa)
Coil Resistance: High Impedance / High-Z (Works with factory computer injector drivers)
Factory Tollerance: +/-5%
Connector: Multec 2 (Delphi)

 

PM sent to Fara04.

Thanks, Rick

 

Are they sold?