3k TCI Streetfighter stall converter
#1
Thread Starter
TECH Apprentice
iTrader: (6)
Joined: Mar 2007
Posts: 393
Likes: 1
From: La Mesa/Pomona
3k stall converter has about 100 miles or so had it put in didn't like it it was too much for me plus I ordered a FLT5 so dont need it still in the box. asking $200 plus shipping..
I also have some gm 3.42 outta of my avalanche about 20,000 miles on them I'll take $70 for those plus shipping.
And the Procharger
-1SC Supercharger in exc cond. Has about 15k miles on it.
1999-2006 Mounting bracket, bolts and spacers.
Vortech Race Bypass Valve w/hose for intake
24x12x4 Intercooler.
New K&N Air filter with rubber mounting elbow
4.0" and 3.1" pulley
I already re-clocked the P-1SC for installing straight-up in our trucks. The bearings looked perfect, oil was clean and I didn't find any oil seepage through the seals. The impeller is perfect and without a knick or scratch on it and everything spins freely with no play.
To install on any 4.8/5.3/6.0l Gen lll truck, you will need:
2 Procharger idler pulleys with spacers/bolts
3" cold side aluminum piping
Asst silicone elbows/clamps
42lb injectors
255lph fuel pump (inline for 99-03, in-tank for 04-06)
One bottle of Procharger Oil.
Serpentine belt
A few misc bolts/washers
I also have some gm 3.42 outta of my avalanche about 20,000 miles on them I'll take $70 for those plus shipping.
And the Procharger
-1SC Supercharger in exc cond. Has about 15k miles on it.1999-2006 Mounting bracket, bolts and spacers.
Vortech Race Bypass Valve w/hose for intake
24x12x4 Intercooler.
New K&N Air filter with rubber mounting elbow
4.0" and 3.1" pulley
I already re-clocked the P-1SC for installing straight-up in our trucks. The bearings looked perfect, oil was clean and I didn't find any oil seepage through the seals. The impeller is perfect and without a knick or scratch on it and everything spins freely with no play.
To install on any 4.8/5.3/6.0l Gen lll truck, you will need:
2 Procharger idler pulleys with spacers/bolts
3" cold side aluminum piping
Asst silicone elbows/clamps
42lb injectors
255lph fuel pump (inline for 99-03, in-tank for 04-06)
One bottle of Procharger Oil.
Serpentine belt
A few misc bolts/washers
Last edited by way2much_01; Mar 6, 2009 at 06:50 PM.
#2
hey bro is it a 4l60e i have a 2006 silverado 5.3 and if it fit ill take it ill give you 300 shipped to mission tx 78572 and is a single disk or a triple disk let me know i have the money here just waiting to send let me know asap and how big is it a 10'' or 12'' inch


