It seems like it is taking me forever to make progress on this thing !! I finally got it re-assembled to the point where it will at least start and run today. I could finish it up in a few hours if 1) a few misc parts I have ordered would come in, and 2) I had some free time. I am anxious to get to drive it again.

 

That setup looks sweet man! Are you using a truck intake, I can't tell from the pics.

How much boost are you going to be running with the IC, are you still going to spray a 175 shot?

 

SWEET!!! That is looking pretty good. I know you will enjoy this setup a TON! Go throw on that 12psi pulley and run on pump gas all day long

 

Gorilla, I am using a LS1 intake. There isn't a good way to run the Whipple with an intercooler and the truck intake. I have been running about 9 psi, hoping to get up around 12 with this setup. I am still going to spray it, but probably a little more this time. I am not sure, but I am thinking about spraying the existing dry shot across the intercooler and then injecting about a 100 wet shot at the manifold.

Ryan, yeah, I am excited but I am really busy right now and don't know when I will be able to finish it up. That part sux-being this close but not completely done. I cant hardly sleep wondering what the dyno is going to show.