will this cam work on my 2003 5.3 silverado rc/sb .
i will be adding cam, long tubes, dual exh, and tuning, stall conv. and other bolt ons.

how much hp- and trq- will this combo be good for?

is there other things you recomend?

thanks guys.. .

 

It will work fine
I would do it after exhaust and stall though you'll need at least a 3000 with that cam in a 5.3

 

Im going to be running that same cam... And I have heard that you can run it without a stall... but at look up its going to feel dead

 

that cam is going to be ok. it will lose some low end torque. but it is going to scream at 2800 and above all the way to 6400 to 6600. i am using the one in my sig. right now i am shifting her at 6500 1-2 and 2-3.

 

what brand cam is that

 

Thunder Racing

 

where do they sell at

 

will it work with whipple

 

thunder racing-------->sponsor to the right www.thunderracing.com

 

just talked 2 david down there at thunder racing he said the tr-224-112 would not work 4 me he told me 2 run like a comp 216-220 at 114