My buddy has an 03 rcsb gmc 5.3 he is wanting to do a cam and stall in, already has his eye on a crane hr-210 part number 1449571, has 210-218 duration with .531 lift, and was looking at a yank 2600 stall. Problem is he has a blown tx-19 jet boat he pulls with the truck. How is this all gonna work? He has a true flow air intake/duramax lower air box, tb spacer, single 3" magnaflow, 06 electric fans, 180 stat, superchips flashpaq programmer and 3.73's now, thinking about headers and the cam and stall. Any opinions are welcome

 

if its the TT 2600 it will be ok.. i had the TT3000 and towed alot,,, just make sure he has a huge trans cooler.

 

Like he mentioned, the yank 2600 & TT3000 retain stock towing capabilities and a 40K gvw cooler would be a good idea