I was wondering y'all have any opinions about installing a stock ls1 cam with
500/500 lift 205/214 duration. What would be the power increase and rpm range?

 

Dont mess with it not worth it in my opinion. The low lift is leaving alot of power on the table. What kind of truck and mods do you ahve? Do you want to use a stall?

 

I have a 2800 stall and hp tuners

 

i ahve an 02 ls1 cam for sale springs and pushrods for 60 shipped

pm me if interested

basically all it will do is give you a weeeeeeeeeeeeeeeee bit more HP but mostly raise your hp range to the high end better for dragracing

well worth 60 IMO i was going to install it but found some cash and got a real big cam

 

I understand that the stock cam is kinda weak by comparison but what about changing the rocker arm ratio?

 

with your stall, you can get a TR220 and your truck would be hauling!!

 

If You Want To Go With A Stock Cam, Go With A Z06 Hotcam Or Somethin.

 

I've got a stock 98' LS1 cam (198/209-.500/.500-119.5) for sale in the classified section if your interested. $20+S&H
With the .500/.500 lift, you can still use the stock springs.

Somebody on here did a before & after with this cam and a nelson tune and gaind alot. Iknow for a fact it was over .5 in the 1/4. I'm 95% sure it was .7. They said it added throughout the rpm especially the top-end.

 

I see in the cam selaction section, there are three cams with a tr220. Which cam would that be the 115,114,112?