Thought I'd post a clip up for anyone that might be interested. The setup is stock manifolds/cats into a custom built 24" long 3" I/O Stainless Works chambered muffler with a 3" core, than out through the stock factory tailpipe. I'm short on cash right now, but when I can have it finished I'll be running a magnaflow y with 2 of the mufflers(same dimensions) with it exiting out each side.

Video is startup, idle, up to around 850 rpm, than up to about 4k rpms, back to idle and up to 850 rpm again, a few high revs, back to idle with a couple of short revs.

http://video.performancetrucks.net/p...2-D84014BBD63F

 

video being optimized??? i wanna hear this thing

 

Optimized. Listening to it now that it's been uploaded the sound quality isn't quite as good. I'll try and get a better video later on today or tomorrow.

 

You have ants. It definately sounds different than the 22" Magnaflow I just installed. Yours is meaner sounding as the Mag sounds like a constant hum.

 

I saw the infestation as well. The Orkin Man can take care of that without a problem. BTW Sounds mean.

 

Thanks for the compliments. Haven't had a chance to get another video yet, cause I've developed a slight exhaust leak. Probably gonna wait till I can find someone to bump my idle up to 850 before I take a new video.

 

that thing sounds bad a$$

 

thanks for posting the clip. I was thinking of doing the same thing. Sounds killer

 

Working on uploading another clip that I took while I was out snapping some pictures to work with in Photoshop this afternoon. Got the camera a little further back and the sound quality's a bit better. BTW......no infestations this time