pcm controlled e-fans?
Mar 17, 2005 | 10:28 PM
#11
Launching!
iTrader: (2)
Joined: Oct 2003
Posts: 223
Likes: 0
From: Hammond La
ok i dont know what i did wrong buut i used pin 42 and put all the settings in and the fans will come on all the time but only when the engine is running with koeo the fans are off it seems like whenever the pcm sees tach signal it turns the fans on
Mar 17, 2005 | 10:46 PM
#12
Originally Posted by greentahoe
Sorry to bring this up from the dead, but Id like to set some LS1 fans to come on with HPTuners. I see the settings mentioned, but what about the
VATS Control
Serial
PWM
None.... is default
Ignition Off
Disable temp ?
Run Time ?
And what about AC settings?
Thanks alot
VATS Control
Serial
PWM
None.... is default
Ignition Off
Disable temp ?
Run Time ?
And what about AC settings?
Thanks alot
and run time set to however long you want the fans to continue running once you shut the engine off.
Thread
Thread Starter
Forum
Replies
Last Post
Wrecker 426
Tuning, Diagnostics, Electronics, and Wiring
1
Sep 30, 2015 09:39 PM
