I was thinking the tahoe may have been a 4wd and thats the the mount didnt fit but i called and its a 03 2wd. They just got a 03 silverado 5.3 2wd but i dont want to pull the motor just to snag the mounts. This blows lol.

 

I used a wholesale account at the dealership and paid like 60 something dollars for the pair i think. I have some Frame mounts you can have for $20+ shipping for the pair. I am not sure if they are what you need though.

 

Turn them up on there sides and let me see how far the bolt holes are apart. My drivers side bolts are pretty far apart. What did the mounts come off of?

 

Not possitive what they came off of but i can do that. What are your measurements?

 

Ill go check real quick and see.

 

drivers side from outside to outside is 6 3/8
bolt holes are 2 3/4 from center to center

Pass side from outside to outside is 7 5/8
bolt holes are 1 5/8 from center to center

 

Mine are not like those measurements. I have one at 6 1/8 inside diameter of bracket 1 3/4 bolt spread and 5 5/8 inside diameter and 1 5/8.

 

Well i just called the stealership and there is not a set of mounts in this state. I cant order a set but i have to pay for them first and hope like hell they are the mounts that fit my truck or i will be out close to $200. I think my welding machine will be warmed this evening.

 

I used a wholesale account and mine wasn't even anywhere close to that much.

 

A friend just came by to let me measure the frame mounts on his 06 and i guess the mounts changed between 03 and 04. Ill be ordering them in the morning from the dealer.