Need Help ASAP

Reply Subscribe

Thread Tools

Search this Thread

Jan 31, 2004 | 10:49 PM

getsome

Thread Starter

Launching!

Joined: May 2003

Posts: 230

Likes: 0

From: Auburn, Nebraska

Need Help ASAP

I am trying to install a cam but not sure how with the heads on it. How do you take the lifters out with the heads on it? Need all the info i can get for install.

Jan 31, 2004 | 10:52 PM

jrp

SN95 Director

iTrader: (16)

Joined: Jul 2003

Posts: 10,759

Likes: 0

From: Valencia, Ca

http://www.ls1howto.com/index.php?article=23

tear down is different but the cam/spring swap should be the same. and you cant remove the lifters without pulling the heads. but for a cam swap you dont need to pull heads.

Jan 31, 2004 | 11:00 PM

getsome

Thread Starter

Launching!

Joined: May 2003

Posts: 230

Likes: 0

From: Auburn, Nebraska

Ya i am putting just cam and springs in. I just didn't know how i could keep everything up without falling down. I have the 14 mm thing to put in the spark plug hole to hold the valves up.

Jan 31, 2004 | 11:20 PM

jrp

SN95 Director

iTrader: (16)

Joined: Jul 2003

Posts: 10,759

Likes: 0

From: Valencia, Ca

Quote:

Originally Posted by getsome

Ya i am putting just cam and springs in. I just didn't know how i could keep everything up without falling down. I have the 14 mm thing to put in the spark plug hole to week the valves up.

just uses the TDC method to hold the vavles up, thats the easiest way.