PerformanceTrucks.net Forums

GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

map sensor ?

   
Old Jan 21, 2005 | 08:53 PM
  #1  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default map sensor ?
ok at 4k the map sensor is reading 29 and the maf is reading 15, but by the time you get to 62k map is still reading 29 and the maf is reading 39. is this correct or is the maf not doing its job down low??
Reply
0
Old Jan 21, 2005 | 09:19 PM
  #2  
storm5.3's Avatar
storm5.3
13 Second Truck Club
iTrader: (1)
 
Joined: Jun 2004
Posts: 870
Likes: 0
From: City by the Sea, Tx
Talking
Man, What are you up to now ???
Reply
0
Old Jan 21, 2005 | 09:24 PM
  #3  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default
nothing trying to figure out if the maf is gone or if its reading right lol
Reply
0
Old Jan 21, 2005 | 09:28 PM
  #4  
storm5.3's Avatar
storm5.3
13 Second Truck Club
iTrader: (1)
 
Joined: Jun 2004
Posts: 870
Likes: 0
From: City by the Sea, Tx
Talking
Oh, O.K. carry on then hahaha lol...Zed
Reply
0
Old Jan 22, 2005 | 10:38 AM
  #5  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default
well zed if you must know im going without a maf and only going to be running on a map sensor only heehhe
Reply
0
Old Jan 22, 2005 | 12:17 PM
  #6  
wkdivr's Avatar
wkdivr
TECH Fanatic
iTrader: (8)
 
Joined: Oct 2003
Posts: 1,760
Likes: 0
From: I like BoomBoom !!
Default
The MAF is the Mass Airflow Sensor. The MAP is Manifold Absolute Pressure, like boost. They should read different.
Reply
0
Old Jan 22, 2005 | 03:45 PM
  #7  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default
yes you are correct, but should the map sensor read that high @ 6200?? that is the ? to be answered here.
Reply
0

Trending Topics

Old Jan 22, 2005 | 04:08 PM
  #8  
wkdivr's Avatar
wkdivr
TECH Fanatic
iTrader: (8)
 
Joined: Oct 2003
Posts: 1,760
Likes: 0
From: I like BoomBoom !!
Default
I'm not an expert in any way, shape, or form, but it looks like you have good vacum. That should be good? Right?
Reply
0
Old Jan 22, 2005 | 06:09 PM
  #9  
ZDEN's Avatar
ZDEN
Launching!
 
Joined: Apr 2003
Posts: 209
Likes: 0
From: Fulshear, TX
Default
my map reads 99 at 5900 rpms and 36 lbs on the maf if that helps any.
Reply
0
Old Jan 22, 2005 | 06:44 PM
  #10  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default
holy **** zden thats is way to high i would think, your maf should read way higher than the maf but then again on a 6000 hp motor your running there must need it lol
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 10:27 AM.