mm my truck got a 6.0 escalade motor and dynatech headers and corsa sport exhaust , asp crank pulley , k&n cai and 224/228 cam im going with heads now and i want to know is this heads good for me or not...
Stage 2E Cylinder Heads
Complete hand porting of intake, and exhaust runners for excellent flow volume & air speed with major bowl work performed. Ferrea 2.02" stainless one piece intake valves, and 1.56" exhaust valves are used in the factory valve seats. High performance dual valve springs coupled with our custom lightweight titanium retainers and specially machined spring cups offer the most stable, and reliable valvetrain. These heads can be milled .030" to increase the compression ratio by 1/2 of a point. This is an excellent street cylinder head with flow numbers approaching 300 CFM on the intake runner and 210+ on the exhaust side. Each set of cylinder heads will come with their own individual flow sheet. If you're looking for a great cylinder head at a great price, look no further. Available for LS2, LS1, LS6, LQ9 and all 5.3L truck castings. See the flow sheet attached to this page for flow data. i need help in here

 

I suggest you give West Coast Cylinder Heads or Patriot Performance a call in the morning.

 

Yes, Heads and raise your compression while you're at it. Get it tuned for premium pump gas and it'll scream.