Guesses on new 2014 5.3L & 6.2L power #s
Apr 1, 2013 | 11:40 AM
#31
TECH Apprentice
Joined: Nov 2009
Posts: 355
Likes: 8
From: Columbus, IN
Not sure if it should be believed yet as pickuptrucks.com has a history of April fools jokes...but they are reporting the 5.3 liter as being 355 hp @ 5600 RPM and 383 lb-ft @ 4100 RPM on 87 octane.
Apr 3, 2013 | 03:13 PM
#37
On The Tree
Joined: Feb 2013
Posts: 160
Likes: 0
I'm trying to figure out what else, besides hp/tq has changed. the 2014 5.3 has less power than the 2013 6.2, yet has a higher tow rating. Yet, while they haven't released the new 6.2's power numbers they claim it will have an even higher tow rating. I must be missing something.
Apr 4, 2013 | 03:14 PM
#39
TECH Fanatic
Joined: Oct 2005
Posts: 1,379
Likes: 0
From: Woodstock Ontario Canada
The 2014 GEN 5 L83 5.3 has the same torque rating as the 2007-2009 L76 6.2 in the GMT900 trucks at 383 lb/ft, but the L83 has 51 LESS cubic inches, not too shabby..
1.18 lb/ft torque per cube, that beats the LS7 at 1.1 lb/ft per cube. So if the L86 follows suit, being 376 cubes, the L86 should have around 444 lb/ft of torque. The L86 is supposed to out torque the LS7 under 4000rpm. The LS& outputs approx. 440 lb/ft at 4000rpm, so this starts to make sense.
The L83 5.3 makes 355 Certifed hp, thats 1.09 per cube, so the 376 cube L86 should make around 410 certified hp.
GEN 5 L86 extrapolates out to 410hp/440 lb/ft from 376cubes(6.2 liters) engine, hmm.
The GEN 4 Cadillac L94 6.2 was rated at 403hp@5700rpm/417@4300rpm
I'm interested to see what the L86 6.2 is going to output, and I wonder how the L86 will position itself compared to the Vette's LT1??????????
peace
Hog
1.18 lb/ft torque per cube, that beats the LS7 at 1.1 lb/ft per cube. So if the L86 follows suit, being 376 cubes, the L86 should have around 444 lb/ft of torque. The L86 is supposed to out torque the LS7 under 4000rpm. The LS& outputs approx. 440 lb/ft at 4000rpm, so this starts to make sense.
The L83 5.3 makes 355 Certifed hp, thats 1.09 per cube, so the 376 cube L86 should make around 410 certified hp.
GEN 5 L86 extrapolates out to 410hp/440 lb/ft from 376cubes(6.2 liters) engine, hmm.
The GEN 4 Cadillac L94 6.2 was rated at 403hp@5700rpm/417@4300rpm
I'm interested to see what the L86 6.2 is going to output, and I wonder how the L86 will position itself compared to the Vette's LT1??????????
peace
Hog
Last edited by hog; Apr 4, 2013 at 04:28 PM.
Apr 4, 2013 | 03:57 PM
#40
TECH Apprentice
Joined: Jul 2009
Posts: 397
Likes: 0
From: Hell
The 2014 GEN 5 L83 5.3 has the same torque rating as the 2007-2009 L76 in the GMT900 trucks at 383 lb/ft.
1.18 lb/ft torque per cube, that beats the LS7 at 1.1 lb/ft per cube. So if the L86 follows suit, being 376 cubes, the L86 should have around 444 lb/ft of torque. The L86 is supposed to out torque the LS7 under 4000rpm. The LS& outputs approx. 440 lb/ft at 4000rpm, so this starts to make sense.
The L83 5.3 makes 355 Certifed hp, thats 1.09 per cube, so the 376 cube L86 should make around 410 certified hp.
GEN 5 L86 extrapolates out to 410hp/440 lb/ft from 376cubes(6.2 liters) engine, hmm.
The GEN 4 Cadillac L94 6.2 was rated at 403hp@5700rpm/417@4300rpm
I'm interested to see what the L86 6.2 is going to output, and I wonder how the L86 will position itself compared to the Vette's LT1??????????
peace
Hog
1.18 lb/ft torque per cube, that beats the LS7 at 1.1 lb/ft per cube. So if the L86 follows suit, being 376 cubes, the L86 should have around 444 lb/ft of torque. The L86 is supposed to out torque the LS7 under 4000rpm. The LS& outputs approx. 440 lb/ft at 4000rpm, so this starts to make sense.
The L83 5.3 makes 355 Certifed hp, thats 1.09 per cube, so the 376 cube L86 should make around 410 certified hp.
GEN 5 L86 extrapolates out to 410hp/440 lb/ft from 376cubes(6.2 liters) engine, hmm.
The GEN 4 Cadillac L94 6.2 was rated at 403hp@5700rpm/417@4300rpm
I'm interested to see what the L86 6.2 is going to output, and I wonder how the L86 will position itself compared to the Vette's LT1??????????
peace
Hog
