Does any one know if there is a site I can go to find an exploded view of the factory locker? Im an old school posi guy, and when I took off the rear cover of my Tahoe to pull the axle (it needs a driver side seal) I saw all kind of clips, and springs, and centifugal weights <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> , and I just closed it up. I recently bought an Eaton, and gears for my 2002 Silverado, and definately dont want to screw up the original carrier upon disasembly. (theres only about 6000 miles on it) Any help would be appricated.. Thanx in advance..

 

no pics for you but that g80 pops out just like the eaton goes in, pull the pin, push in the axles, clips fall out, pull the axles, pull the caps and pry out the carier. nothing special.

 

Thanks Parish, I'll give it a try, I just remember not being able to get to the bolt in the cross pin last time. Thanx....