engine performance mods!!!!
#1
What could I do to gain around 50 to 100hp? I currently have a 2000 Silverado, with a 4.8 5 speed manual (currently swapping out for a T56). I have some bolt ons JBA Headers, Magnaflo exhaust with out cats, HPP 3 tuning and a MAX Air intake. Eventually I want to do a supercharger, cam, and some electric fans. I would like to gain 50 to 100 hp out of my engine before I do the supercharger though. Any ideas??????!!!!
#2
Nitrous would do it. If your against that then i would go with a cam and springs swap. One more thing, do you have some type of Posi or locker and what gear ratio are you running. I know that the ones who have swapped in the T-56 went with a much lower gear ratio like 4:10 or 4:56.
#3
Originally Posted by VortecSierra
Nitrous would do it. If your against that then i would go with a cam and springs swap. One more thing, do you have some type of Posi or locker and what gear ratio are you running. I know that the ones who have swapped in the T-56 went with a much lower gear ratio like 4:10 or 4:56.
#5
Originally Posted by lotsofhp
Well if you want to find 50 - 100 hp with out doing a supercharger or a cam..........I dont know what the hell you coud do.
I am looking at doing the cam and electric fans first I think.... I am just looking at what internal mods I can do to the truck.
#6
Um. Im not sure what the question is but I would say heads/cam would get your your 50-100 HP. Or you could go with nitrous and jet it down when you get a supercharger.
I think those are the ONLY mods you can do to get the power you are after.
I think those are the ONLY mods you can do to get the power you are after.
#7
TECH Fanatic
Joined: Sep 2004
Posts: 1,288
Likes: 0
From: Somewhere between Auburn, AL and Columbus, GA
I think if you could put a cam in like 212/218 which is a popular one around here, or maybe the TR 220 since you have a manual, and with that and electric fans and some tuning I think you could see 40 or more to the ground which is more than 50 at the crank.
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
Feb 21, 2022 10:54 AM
Steve-O-08
PROJECTS GALLERY
323
Apr 19, 2018 09:32 AM
lxcoupe
FORCED INDUCTION
1
Jul 27, 2015 08:19 PM



