Dyno Results
#1
Thread Starter
TECH Fanatic
iTrader: (16)
Joined: Oct 2002
Posts: 1,557
Likes: 1
From: Pickerington, Ohio
Well, earlier this year the truck made 270rwhp and 307rwtq. Today I had it on the dyno again.
- HPPIII Programming
+ EFans, Predator Programming, and New Wheels/Tires 1" Shorter & 10lbs Heavier
The first run I was running rich - 11.1. I took out 2.5% fuel and it was at 12.3. The truck made 276.4rwhp and 302.5rwtq. Not what I was expecting but at least I now know it was running rich.
- HPPIII Programming
+ EFans, Predator Programming, and New Wheels/Tires 1" Shorter & 10lbs Heavier
The first run I was running rich - 11.1. I took out 2.5% fuel and it was at 12.3. The truck made 276.4rwhp and 302.5rwtq. Not what I was expecting but at least I now know it was running rich.
#3
you could certainly benefit from a real tune, being lean as it is down low, would certainly pick up low end torque , and if you lean it out some more on top that's easy power too. Not to mention trucks have horrible timing curves and power enrichment delays...
Thread
Thread Starter
Forum
Replies
Last Post
jscherbs
GM Parts Classifieds
3
Sep 30, 2015 07:54 AM
norris_83
Tuning, Diagnostics, Electronics, and Wiring
0
Sep 9, 2015 04:14 PM




