biggest cam in stock 6.0
Mar 14, 2007 | 09:09 AM
#11
Originally Posted by red83
im not concerned about streetability issues. it is a weekend only car. as far as the intake i am going with the livernois motorsports stage 3 l92 heads and a carb intake. that should help my upper rpms, and the car is going to see the spray
i was thinking something around a 230 to 240ish dur and .610 lift on a 113 or 114
thanks for the replies . keep them coming
i was thinking something around a 230 to 240ish dur and .610 lift on a 113 or 114
thanks for the replies . keep them coming
Mar 14, 2007 | 09:45 AM
#12
Our 1998 Z28 race car (in the sig) has ported 241s and a 246', .603", 113 LSA cam in it (might be switching to a different heads/cam setup though). No problems, ours will flow with the GMPP single plane on top though. 
I also plan to install a Torquer type-cam (~233' to ~236') in my 2001 Camaro SS with an LQ4.
I also plan to install a Torquer type-cam (~233' to ~236') in my 2001 Camaro SS with an LQ4.
Mar 14, 2007 | 04:27 PM
#13
Thread Starter
TECH Resident
iTrader: (64)
Joined: Jul 2005
Posts: 909
Likes: 0
From: sneaking in your back door as you leave!/cartersville ga
keep in mind i am running the l92 heads 2.16 intake valve. that is whats got me thinking about the clearance issues with that large of a cam.
Thread
Thread Starter
Forum
Replies
Last Post
GrooveCityZ71
GM Engine & Exhaust Performance
7
Aug 31, 2015 12:05 PM
Suburban2500
INTERNAL ENGINE MODIFICATIONS
31
Jul 19, 2015 04:50 PM
